Considering an ECU remap for your Alpina B3 S 3.5i 400hp? A Stage 1 remap can take this All petrol engine from 400 BHP to 450 BHP and from 540 Nm to 600 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Alpina B3 S can achieve.
The Alpina B3 S 3.5i 400hp is a 3.0L naturally aspirated petrol engine producing 400 BHP and 540 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 450 BHP and 600 Nm — a gain of around 50 BHP (12%) and 60 Nm (11%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 3.0T 440hp | 440 → 480 | +40 | 660 → 700 | +40 | Moderate (5.5/10) |
Get a personalised remap quote for your Alpina B3 S. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
