Considering an ECU remap for your Alpina B3 Bi-Turbo 410hp? A Stage 1 remap can take this All petrol engine from 410 BHP to 450 BHP and from 600 Nm to 680 Nm of torque (turbocharged). This engine scores 6/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Alpina B3 can achieve.
The Alpina B3 Bi-Turbo 410hp is a 3.0L turbocharged petrol engine producing 410 BHP and 600 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 450 BHP and 680 Nm — a gain of around 40 BHP (10%) and 80 Nm (13%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 3.5i 360hp | 360 → 400 | +40 | 500 → 560 | +60 |
| Moderate (4.5/10) |
| Bi-Turbo 462hp | 462 → 490 | +28 | 700 → 760 | +60 | Moderate (5.5/10) |
Get a personalised remap quote for your Alpina B3. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
