Considering an ECU remap for your Alpina B6 B6 Bi-Turbo 540hp? A Stage 1 remap can take this All petrol engine from 540 BHP to 575 BHP and from 730 Nm to 800 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Alpina B6 can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Alpina B6 B6 Bi-Turbo 540hp is a 4.4L turbocharged petrol engine producing 540 BHP and 730 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 575 BHP and 800 Nm — a gain of around 35 BHP (6%) and 70 Nm (10%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine |
|---|
| BHP |
|---|
| Gain |
|---|
| Torque |
|---|
| Gain |
|---|
| Score |
|---|
| 4.4 V8 Bi-Turbo 500hp | 500 → 600 | +100 | 700 → 800 | +100 | Good (6.5/10) |
| 4.4 V8 Bi-Turbo 600hp | 600 → 680 | +80 | 800 → 850 | +50 | Moderate (5.5/10) |
Get a personalised remap quote for your Alpina B6. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
