Considering an ECU remap for your Alpina D3 2.0D 214hp? A Stage 1 remap can take this E90/91 - 2005 - 2013 diesel engine from 214 BHP to 265 BHP and from 450 Nm to 480 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Alpina D3 can achieve.
The Alpina D3 2.0D 214hp is a 2.0L turbocharged diesel engine producing 214 BHP and 450 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 265 BHP and 480 Nm — a gain of around 51 BHP (24%) and 30 Nm (7%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.. Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0D 200hp | 200 → 230 | +30 | 410 → 460 |
| +50 |
| Good (6/10) |
| D3 Bi-Turbo 350hp | 350 → 395 | +45 | 700 → 750 | +50 | Moderate (5.5/10) |
Get a personalised remap quote for your Alpina D3. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
