Expected gains of +62 BHP and +80 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Alpina XD4 3.0 Quad-Turbo 388hp? A Stage 1 remap can take this 2018 - 2020 diesel engine from 388 BHP to 450 BHP and from 770 Nm to 850 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Alpina XD4 can achieve.
The Alpina XD4 3.0 Quad-Turbo 388hp is a 3.0L turbocharged diesel engine producing 388 BHP and 770 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 450 BHP and 850 Nm — a gain of around 62 BHP (16%) and 80 Nm (10%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Get a personalised remap quote for your Alpina XD4. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.