Expected gains of +18 BHP and +110 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Alpine A110 S 1.8 Turbo 292hp? A Stage 1 remap can take this 2017 -> petrol engine from 292 BHP to 310 BHP and from 320 Nm to 430 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Alpine A110 can achieve.
The Alpine A110 S 1.8 Turbo 292hp is a 1.8L turbocharged petrol engine producing 292 BHP and 320 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 310 BHP and 430 Nm — a gain of around 18 BHP (6%) and 110 Nm (34%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.8 Turbo 252hp |
| 252 → 285 |
| +33 |
| 320 → 430 |
| +110 |
| Good (7/10) |
Get a personalised remap quote for your Alpine A110. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.