Considering an ECU remap for your Audi 80 1.9 TDI 90hp? A Stage 1 remap can take this 1991 - 1995 diesel engine from 90 BHP to 115 BHP and from 202 Nm to 260 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Audi 80 can achieve.
The Audi 80 1.9 TDI 90hp is a 1.9L turbocharged diesel engine producing 90 BHP and 202 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 115 BHP and 260 Nm — a gain of around 25 BHP (28%) and 58 Nm (29%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
From a technical perspective, the ECU is typically a Bosch EDC15 (likely), and the transmission is manual and dsg/s tronic automatics are common depending on model/engine..
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.. Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Get a personalised remap quote for your Audi 80. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
