Considering an ECU remap for your Audi Q3 40 TDI (2.0D) 200hp? A Stage 1 remap can take this F3 - 2019 -> diesel engine from 200 BHP to 240 BHP and from 400 Nm to 460 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Audi Q3 can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Audi Q3 40 TDI (2.0D) 200hp is a 2.0L turbocharged diesel engine producing 200 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 240 BHP and 460 Nm — a gain of around 40 BHP (20%) and 60 Nm (15%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
From a technical perspective, the ECU is a Bosch EDC17 (likely), and the transmission is manual and dsg/s tronic automatics are common depending on model/engine. some dsg/dual-clutch gearboxes have torque management; calibration may be torque-limited. at this torque level, transmission and driveline servicing history becomes especially important..
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 35 TFSI (1.5T) 150hp | 150 → 185 | +35 | 250 → 310 | +60 | Good (7.5/10) |
| 35 TDI (2.0D) 150hp | 150 → 195 | +45 | 340 → 430 | +90 | Good (7.5/10) |
| 40 TFSI (2.0T) 190hp | 190 → 245 | +55 | 320 → 430 | +110 | Excellent (8/10) |
| 40 TDI (2.0D) 190hp | 190 → 220 | +30 | 400 → 450 | +50 | Good (6.5/10) |
| 45 TFSI (2.0T) 230hp | 230 → 300 | +70 | 350 → 460 | +110 | Excellent (8/10) |
| 45 TFSI-e 245hp | 245 → 285 | +40 | 400 → 460 | +60 | Good (6.5/10) |
Get a personalised remap quote for your Audi Q3. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
