Considering an ECU remap for your Audi Q3 2.0 TDI CR 150hp? A Stage 1 remap can take this U8 - 2015 - 2018 diesel engine from 150 BHP to 195 BHP and from 340 Nm to 410 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Audi Q3 can achieve.
The Audi Q3 2.0 TDI CR 150hp is a 2.0L turbocharged diesel engine producing 150 BHP and 340 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 195 BHP and 410 Nm — a gain of around 45 BHP (30%) and 70 Nm (21%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
From a technical perspective, the ECU is a Bosch EDC17 (likely), and the transmission is manual and dsg/s tronic automatics are common depending on model/engine. some dsg/dual-clutch gearboxes have torque management; calibration may be torque-limited..
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 TDI CR 120hp | 120 → 185 | +65 | 290 → 410 | +120 | Excellent (8/10) |
| 1.4 TFSI 125hp | 125 → 170 | +45 | 200 → 310 | +110 | Excellent (8/10) |
| 1.4 TFSI 150hp | 150 → 170 | +20 | 250 → 310 | +60 | Good (7/10) |
| 2.0 TFSI 180hp | 180 → 300 | +120 | 320 → 440 | +120 | Excellent (8/10) |
| 2.0 TDI CR 184hp | 184 → 220 | +36 | 380 → 430 | +50 | Good (7/10) |
| 2.0 TFSI 220hp | 220 → 300 | +80 | 350 → 440 | +90 | Excellent (8/10) |
| RS 2.5 TFSI 340hp | 340 → 420 | +80 | 450 → 620 | +170 | Excellent (8/10) |
| RS 2.5 TFSI Performance 367hp | 367 → 420 | +53 | 450 → 620 | +170 | Good (7/10) |
Get a personalised remap quote for your Audi Q3. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
