Considering an ECU remap for your Audi Q5 3.0 TDI 211hp? A Stage 1 remap can take this 8R - 2008 - 2011 diesel engine from 211 BHP to 280 BHP and from 500 Nm to 580 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Audi Q5 can achieve.
The Audi Q5 3.0 TDI 211hp is a 3.0L turbocharged diesel engine producing 211 BHP and 500 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 280 BHP and 580 Nm — a gain of around 69 BHP (33%) and 80 Nm (16%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
From a technical perspective, the ECU is a Bosch EDC16 (likely), and the transmission is manual and dsg/s tronic automatics are common depending on model/engine. some dsg/dual-clutch gearboxes have torque management; calibration may be torque-limited. at this torque level, transmission and driveline servicing history becomes especially important..
Considerations: High tuned torque: check transmission torque capacity and service history.. Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain |
|---|
| Score |
|---|
| 2.0 TDI CR 136hp | 136 → 185 | +49 | 320 → 410 | +90 | Excellent (8/10) |
| 2.0 TDI CR 143hp | 143 → 185 | +42 | 320 → 410 | +90 | Good (7/10) |
| 2.0 TDI CR 163hp | 163 → 205 | +42 | 350 → 430 | +80 | Good (7.5/10) |
| 2.0 TDI CR 170hp | 170 → 205 | +35 | 350 → 430 | +80 | Good (7.5/10) |
| 2.0 TFSI 180hp | 180 → 260 | +80 | 320 → 400 | +80 | Excellent (8.5/10) |
| 2.0 TFSI 211hp | 211 → 260 | +49 | 350 → 400 | +50 | Good (7/10) |
| 3.0 TDI 240hp | 240 → 285 | +45 | 500 → 625 | +125 | Good (7.5/10) |
| 2.0 TFSI Hybrid 245hp | 245 → 300 | +55 | 480 → 550 | +70 | Good (6.5/10) |
| 3.2 FSI 270hp | 270 → 285 | +15 | 330 → 350 | +20 | Moderate (4/10) |
Get a personalised remap quote for your Audi Q5. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
