Considering an ECU remap for your Audi Q7 3.0 TFSI 272hp? A Stage 1 remap can take this 4L MK2 - 2010 - 2014 petrol engine from 272 BHP to 400 BHP and from 400 Nm to 520 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Audi Q7 can achieve.
The Audi Q7 3.0 TFSI 272hp is a 3.0L turbocharged petrol engine producing 272 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 400 BHP and 520 Nm — a gain of around 128 BHP (47%) and 120 Nm (30%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
From a technical perspective, the ECU is typically a Bosch MED17 (likely), and the transmission is manual and dsg/s tronic automatics are common depending on model/engine. some dsg/dual-clutch gearboxes have torque management; calibration may be torque-limited. at this torque level, transmission and driveline servicing history becomes especially important..
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP |
|---|
| Gain |
|---|
| Torque |
|---|
| Gain |
|---|
| Score |
|---|
| 3.0 TDI 204hp | 204 → 295 | +91 | 450 → 600 | +150 | Excellent (8/10) |
| 3.0 TDI 240hp | 240 → 295 | +55 | 550 → 600 | +50 | Good (7/10) |
| 3.0 TDI 245hp | 245 → 300 | +55 | 550 → 650 | +100 | Good (7.5/10) |
| 3.6 FSI 280hp | 280 → 302 | +22 | 360 → 384 | +24 | Moderate (4/10) |
| 3.0 TFSI 333hp | 333 → 380 | +47 | 440 → 500 | +60 | Good (6/10) |
| 4.2 TDI 340hp | 340 → 390 | +50 | 760 → 880 | +120 | Good (7/10) |
| 4.2 FSI 350hp | 350 → 367 | +17 | 440 → 458 | +18 | Limited (3/10) |
| 6.0 V12 TDI 500hp | 500 → 600 | +100 | 1000 → 1200 | +200 | Good (7.5/10) |
Get a personalised remap quote for your Audi Q7. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
