BMW 1 Series 114D 95hp (1496cc) Remap

The BMW 1 serie 114D 95hp (1496cc) is a 1.5L turbocharged diesel engine producing 95 BHP and 235 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 140 BHP and 335 Nm — a gain of around 45 BHP (47%) and 100 Nm (43%).

This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.

From a technical perspective, the ECU is typically a Bosch EDC17 (likely), and the transmission is many variants use zf 8-speed automatic (where fitted); manuals also exist..

Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.

Fuel economy note: economy gains unlikely at full power; depends on driving style.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.