Data under review — The figures shown for this engine variant are currently being verified. They may be updated as we refine our data.
Considering an ECU remap for your BMW 4 Series 440i 326hp? A Stage 1 remap can take this F32/33 - May/2016 - 2019 petrol engine from 326 BHP to 400 BHP and from 450 Nm to 585 Nm of torque (naturally aspirated). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your BMW 4 Series can achieve.
The BMW 4 serie 440i 326hp is a 3.0L naturally aspirated petrol engine producing 326 BHP and 450 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 400 BHP and 585 Nm — a gain of around 74 BHP (23%) and 135 Nm (30%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
From a technical perspective, the transmission is many variants use zf 8-speed automatic (where fitted); manuals also exist. at this torque level, transmission and driveline servicing history becomes especially important..
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. Unusually high gain for NA engine: treat as an estimate and verify against the exact engine variant.. High tuned torque: check transmission torque capacity and service history.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 418d 150hp | 150 → 190 | +40 | 320 → 400 | +80 | Excellent (8/10) |
| 420d 163hp | 163 → 220 | +57 | 380 → 440 | +60 | Good (7.5/10) |
| 420d 184hp | 184 → 220 | +36 | 380 → 440 | +60 | Good (7/10) |
| 420i 184hp | 184 → 250 | +66 | 270 → 440 | +170 | Good (6.5/10) |
| 420d 190hp | 190 → 220 | +30 | 400 → 440 | +40 | Good (6.5/10) |
| 425d 224hp | 224 → 270 | +46 | 450 → 500 | +50 | Good (7/10) |
| 430i 252hp | 252 → 287 | +35 | 350 → 450 | +100 | Moderate (5.5/10) |
| 430d 258hp | 258 → 310 | +52 | 560 → 650 | +90 | Good (7/10) |
| 435d 313hp | 313 → 360 | +47 | 630 → 700 | +70 | Good (6.5/10) |
Get a personalised remap quote for your BMW 4 Series. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
