BMW i8 i8 362hp Remap

The BMW i8 i8 362hp is a 1.5L naturally aspirated petrol engine producing 362 BHP and 570 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 400 BHP and 650 Nm — a gain of around 38 BHP (10%) and 80 Nm (14%).

This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.

From a technical perspective, the transmission is many variants use zf 8-speed automatic (where fitted); manuals also exist. at this torque level, transmission and driveline servicing history becomes especially important..

Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.