Considering an ECU remap for your BMW M6 V10 507hp? A Stage 1 remap can take this E63/E64 - 2003 - 2012 petrol engine from 507 BHP to 535 BHP and from 520 Nm to 550 Nm of torque (naturally aspirated). This engine scores 3.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your BMW M6 can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The BMW M6 V10 507hp is a 5.0L naturally aspirated petrol engine producing 507 BHP and 520 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 535 BHP and 550 Nm — a gain of around 28 BHP (6%) and 30 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
From a technical perspective, the transmission is many variants use zf 5/6-speed automatics (where fitted); manuals also exist. at this torque level, transmission and driveline servicing history becomes especially important..
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Get a personalised remap quote for your BMW M6. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
