Considering an ECU remap for your Buick Encore 1.7 CDTi 130hp? A Stage 1 remap can take this 2012 - 2016 diesel engine from 130 BHP to 160 BHP and from 300 Nm to 350 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Buick Encore can achieve.
The Buick Encore 1.7 CDTi 130hp is a 1.7L turbocharged diesel engine producing 130 BHP and 300 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 160 BHP and 350 Nm — a gain of around 30 BHP (23%) and 50 Nm (17%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.4 Turbo 140hp | 140 → 160 | +20 | 200 → 250 | +50 | Good (7/10) |
Get a personalised remap quote for your Buick Encore. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
