Considering an ECU remap for your Buick Encore 1.6 CDTi 110hp? A Stage 1 remap can take this 2016 - 2018 diesel engine from 110 BHP to 140 BHP and from 300 Nm to 360 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Buick Encore can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Buick Encore 1.6 CDTi 110hp is a 1.6L turbocharged diesel engine producing 110 BHP and 300 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 140 BHP and 360 Nm — a gain of around 30 BHP (27%) and 60 Nm (20%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.6 CDTi 136hp | 136 → 160 | +24 |
| 320 → 380 |
| +60 |
| Good (7/10) |
| 1.4 Turbo 152hp | 152 → 180 | +28 | 235 → 290 | +55 | Good (7.5/10) |
Get a personalised remap quote for your Buick Encore. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
