Considering an ECU remap for your Chevrolet Cobalt SS 2.4 173hp? A Stage 1 remap can take this 2008 - 2010 petrol engine from 173 BHP to 190 BHP and from 221 Nm to 240 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Cobalt can achieve.
The Chevrolet Cobalt SS 2.4 173hp is a 2.4L naturally aspirated petrol engine producing 173 BHP and 221 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 190 BHP and 240 Nm — a gain of around 17 BHP (10%) and 19 Nm (9%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.2 155hp | 155 → 170 | +15 | 203 → 225 | +22 | Moderate (4.5/10) |
| 2.0 Turbo 260hp | 260 → 290 | +30 | 350 → 390 | +40 | Good (6.5/10) |
Get a personalised remap quote for your Chevrolet Cobalt. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
