Considering an ECU remap for your Chevrolet Colorado 2.8 181hp? A Stage 1 remap can take this 2012 -> diesel engine from 181 BHP to 210 BHP and from 500 Nm to 540 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Colorado can achieve.
The Chevrolet Colorado 2.8 181hp is a 2.8L turbocharged diesel engine producing 181 BHP and 500 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 210 BHP and 540 Nm — a gain of around 29 BHP (16%) and 40 Nm (8%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.8d 184hp | 184 → 220 | +36 | 500 → 560 | +60 | Good (7/10) |
| 3.6 V6 305hp | 305 → 325 | +20 | 365 → 390 | +25 | Moderate (4/10) |
Get a personalised remap quote for your Chevrolet Colorado. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
