Expected gains of +20 BHP and +55 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Chevrolet Cruze 1.6 CDTI 140hp? A Stage 1 remap can take this 2017 - 2019 diesel engine from 140 BHP to 160 BHP and from 325 Nm to 380 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Cruze can achieve.
The Chevrolet Cruze 1.6 CDTI 140hp is a 1.6L turbocharged diesel engine producing 140 BHP and 325 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 160 BHP and 380 Nm — a gain of around 20 BHP (14%) and 55 Nm (17%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.4 Turbo 155hp | 155 → 180 | +25 | 240 → 270 | +30 | Good (6.5/10) |
Get a personalised remap quote for your Chevrolet Cruze. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.