Considering an ECU remap for your Chevrolet Equinox 2.0T 260hp? A Stage 1 remap can take this 2018 -> petrol engine from 260 BHP to 300 BHP and from 353 Nm to 450 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Equinox can achieve.
The Chevrolet Equinox 2.0T 260hp is a 2.0L turbocharged petrol engine producing 260 BHP and 353 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 300 BHP and 450 Nm — a gain of around 40 BHP (15%) and 97 Nm (27%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.6d 139hp | 139 → 165 | +26 | 325 → 380 | +55 | Good (7/10) |
Get a personalised remap quote for your Chevrolet Equinox. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
