Expected gains of +47 BHP and +97 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Chevrolet Malibu 2.0 Turbo 253hp? A Stage 1 remap can take this 2019 -> petrol engine from 253 BHP to 300 BHP and from 353 Nm to 450 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Malibu can achieve.
The Chevrolet Malibu 2.0 Turbo 253hp is a 2.0L turbocharged petrol engine producing 253 BHP and 353 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 300 BHP and 450 Nm — a gain of around 47 BHP (19%) and 97 Nm (27%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|
| 1.5 Turbo 165hp | 165 → 185 | +20 | 250 → 280 | +30 | Good (6.5/10) |
Get a personalised remap quote for your Chevrolet Malibu. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.