Expected gains of +22 BHP and +24 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Chevrolet Traverse 3.6 V6 288hp? A Stage 1 remap can take this 2009 - 2012 petrol engine from 288 BHP to 310 BHP and from 366 Nm to 390 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Traverse can achieve.
The Chevrolet Traverse 3.6 V6 288hp is a 3.6L naturally aspirated petrol engine producing 288 BHP and 366 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 310 BHP and 390 Nm — a gain of around 22 BHP (8%) and 24 Nm (7%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 3.6 V6 281hp | 281 → 300 | +19 | 361 → 385 | +24 | Moderate (4/10) |
Get a personalised remap quote for your Chevrolet Traverse. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.