Expected gains of +19 BHP and +24 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Chevrolet Traverse 3.6 V6 281hp? A Stage 1 remap can take this 2012 - 2017 petrol engine from 281 BHP to 300 BHP and from 361 Nm to 385 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Traverse can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Chevrolet Traverse 3.6 V6 281hp is a 3.6L naturally aspirated petrol engine producing 281 BHP and 361 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 300 BHP and 385 Nm — a gain of around 19 BHP (7%) and 24 Nm (7%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain |
|---|
| Score |
|---|
| 3.6 V6 288hp | 288 → 310 | +22 | 366 → 390 | +24 | Moderate (4/10) |
Get a personalised remap quote for your Chevrolet Traverse. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.