Considering an ECU remap for your Chevrolet Trax 1.7 VCDI 110hp? A Stage 1 remap can take this 2013 -> diesel engine from 110 BHP to 165 BHP and from 260 Nm to 350 Nm of torque (turbocharged). This engine scores 8.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Chevrolet Trax can achieve.
The Chevrolet Trax 1.7 VCDI 110hp is a 1.7L turbocharged diesel engine producing 110 BHP and 260 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 165 BHP and 350 Nm — a gain of around 55 BHP (50%) and 90 Nm (35%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: economy gains unlikely at full power; depends on driving style.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.7 VCDI 130hp | 130 → 165 | +35 | 280 → 350 | +70 | Excellent (8/10) |
| 1.4 Turbo 140hp | 140 → 170 | +30 | 200 → 260 | +60 | Good (7.5/10) |
Get a personalised remap quote for your Chevrolet Trax. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
