Considering an ECU remap for your Citroën Jumper 3.0 HDi 180hp? A Stage 1 remap can take this 2012 - 2014 diesel engine from 180 BHP to 215 BHP and from 400 Nm to 500 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Citroën Jumper can achieve.
The Citroën Jumper 3.0 HDi 180hp is a 3.0L turbocharged diesel engine producing 180 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 215 BHP and 500 Nm — a gain of around 35 BHP (19%) and 100 Nm (25%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.2 HDi 110hp | 110 → 180 | +70 | 250 → 360 | +110 | Excellent (8.5/10) |
| 2.2 HDi 130hp | 130 → 180 | +50 | 320 → 410 | +90 | Excellent (8/10) |
| 2.2 HDi 150hp | 150 → 180 | +30 | 350 → 410 | +60 | Good (7/10) |
Get a personalised remap quote for your Citroën Jumper. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
