Citroën Jumper 2.2 BlueHDI 140hp Remap

The Citroën Jumper 2.2 BlueHDI 140hp is a 2.2L turbocharged diesel engine producing 140 BHP and 340 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 185 BHP and 430 Nm — a gain of around 45 BHP (32%) and 90 Nm (26%).

This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.

Considerations: High tuned torque: check transmission torque capacity and service history.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.

Fuel economy note: possible improvement with conservative driving.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.