Expected gains of +15 BHP and +30 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Dacia Logan TCE 100 Eco-G 100hp? A Stage 1 remap can take this 2021 -> petrol engine from 100 BHP to 115 BHP and from 170 Nm to 200 Nm of torque (turbocharged). This engine scores 7/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Dacia Logan can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Dacia Logan TCE 100 Eco-G 100hp is a 1.0L turbocharged petrol engine producing 100 BHP and 170 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 115 BHP and 200 Nm — a gain of around 15 BHP (15%) and 30 Nm (18%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain |
|---|
| Score |
|---|
| TCe 90 90hp | 90 → 110 | +20 | 160 → 175 | +15 | Good (7/10) |
Get a personalised remap quote for your Dacia Logan. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.