Considering an ECU remap for your Daewoo Nubira 2.0 VCDi 121hp? A Stage 1 remap can take this All diesel engine from 121 BHP to 155 BHP and from 280 Nm to 330 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Daewoo Nubira can achieve.
The Daewoo Nubira 2.0 VCDi 121hp is a 2.0L turbocharged diesel engine producing 121 BHP and 280 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 155 BHP and 330 Nm — a gain of around 34 BHP (28%) and 50 Nm (18%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0i 133hp | 133 → 143 | +10 | 184 → 199 | +15 | Moderate (4/10) |
Get a personalised remap quote for your Daewoo Nubira. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
