Considering an ECU remap for your Dodge Caliber 2.4 SRT4 295hp? A Stage 1 remap can take this 2012 -> petrol engine from 295 BHP to 330 BHP and from 363 Nm to 420 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Dodge Caliber can achieve.
The Dodge Caliber 2.4 SRT4 295hp is a 2.4L naturally aspirated petrol engine producing 295 BHP and 363 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 330 BHP and 420 Nm — a gain of around 35 BHP (12%) and 57 Nm (16%).
This engine has limited remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
Get a personalised remap quote for your Dodge Caliber. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
