Considering an ECU remap for your Dodge Dakota 3.7 V6 210hp? A Stage 1 remap can take this 2005 - 2011 petrol engine from 210 BHP to 230 BHP and from 319 Nm to 340 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Dodge Dakota can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Dodge Dakota 3.7 V6 210hp is a 3.7L naturally aspirated petrol engine producing 210 BHP and 319 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 230 BHP and 340 Nm — a gain of around 20 BHP (10%) and 21 Nm (7%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain |
|---|
| Score |
|---|
| 4.7 V8 235hp | 235 → 255 | +20 | 400 → 425 | +25 | Limited (3.5/10) |
| 4.7 V8 265hp | 265 → 285 | +20 | 450 → 475 | +25 | Limited (3.5/10) |
Get a personalised remap quote for your Dodge Dakota. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
