Considering an ECU remap for your Dodge Dart 2.0i 160hp? A Stage 1 remap can take this 2013 - 2016 petrol engine from 160 BHP to 180 BHP and from 210 Nm to 230 Nm of torque (naturally aspirated). This engine scores 4.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Dodge Dart can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Dodge Dart 2.0i 160hp is a 2.0L naturally aspirated petrol engine producing 160 BHP and 210 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 180 BHP and 230 Nm — a gain of around 20 BHP (12%) and 20 Nm (10%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain |
|---|
| Score |
|---|
| 1.4T Multiair 160hp | 160 → 185 | +25 | 250 → 290 | +40 | Good (7/10) |
| 2.4 Multiair 184hp | 184 → 200 | +16 | 232 → 250 | +18 | Moderate (5.5/10) |
Get a personalised remap quote for your Dodge Dart. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
