Considering an ECU remap for your Dodge Nitro 4.0 V6 260hp? A Stage 1 remap can take this 2007 - 2010 petrol engine from 260 BHP to 280 BHP and from 359 Nm to 390 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Dodge Nitro can achieve.
The Dodge Nitro 4.0 V6 260hp is a 4.0L naturally aspirated petrol engine producing 260 BHP and 359 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 280 BHP and 390 Nm — a gain of around 20 BHP (8%) and 31 Nm (9%).
This engine has limited remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.8 CRD 177hp | 177 → 210 | +33 | 420 → 500 | +80 | Good (6.5/10) |
| 3.7 V6 210hp | 210 → 230 | +20 | 319 → 340 | +21 | Moderate (4/10) |
Get a personalised remap quote for your Dodge Nitro. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
