Expected gains of +20 BHP and +30 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Dodge Viper 8.4 V10 SRT-10 600hp? A Stage 1 remap can take this 2008 -> petrol engine from 600 BHP to 620 BHP and from 760 Nm to 790 Nm of torque (naturally aspirated). This engine scores 3/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Dodge Viper can achieve.
The Dodge Viper 8.4 V10 SRT-10 600hp is a 8.4L naturally aspirated petrol engine producing 600 BHP and 760 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 620 BHP and 790 Nm — a gain of around 20 BHP (3%) and 30 Nm (4%).
This engine has low remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 8.4 V10 640hp | 640 → 670 | +30 | 815 → 875 | +60 | Limited (3.5/10) |
Get a personalised remap quote for your Dodge Viper. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.