Expected gains of +50 BHP and +160 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Ferrari 488 GTB/Spider 3.9 V8 Bi-Turbo 670hp? A Stage 1 remap can take this 2015 -> petrol engine from 670 BHP to 720 BHP and from 760 Nm to 920 Nm of torque (turbocharged). This engine scores 6/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ferrari 488 GTB/Spider can achieve.
The Ferrari 488 GTB/Spider 3.9 V8 Bi-Turbo 670hp is a 3.9L turbocharged petrol engine producing 670 BHP and 760 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 720 BHP and 920 Nm — a gain of around 50 BHP (7%) and 160 Nm (21%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 3.9 V8 Bi-Turbo Pista 720hp | 720 → 770 | +50 | 770 → 850 | +80 | Moderate (5.5/10) |
Get a personalised remap quote for your Ferrari 488 GTB/Spider. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.