Fiat Ducato 2.3 180 Multijet (EUR6) 177hp Remap

The Fiat Ducato 2.3 180 Multijet (EUR6) 177hp is a 2.3L turbocharged diesel engine producing 177 BHP and 400 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 200 BHP and 470 Nm — a gain of around 23 BHP (13%) and 70 Nm (18%).

This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.

Considerations: High tuned torque: check transmission torque capacity and service history.

Fuel economy note: possible improvement with conservative driving.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.