Considering an ECU remap for your Fiat Sedici 2.0 Mjet 135hp? A Stage 1 remap can take this All diesel engine from 135 BHP to 165 BHP and from 320 Nm to 380 Nm of torque (turbocharged). This engine scores 8/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Fiat Sedici can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Fiat Sedici 2.0 Mjet 135hp is a 2.0L turbocharged diesel engine producing 135 BHP and 320 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 165 BHP and 380 Nm — a gain of around 30 BHP (22%) and 60 Nm (19%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.9 JTD 120hp | 120 → 160 | +40 |
| 280 → 360 |
| +80 |
| Excellent (8.5/10) |
| 2.0 Mjet 150hp | 150 → 180 | +30 | 367 → 420 | +53 | Good (7/10) |
Get a personalised remap quote for your Fiat Sedici. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
