Considering an ECU remap for your Ford Edge 3.5 V6 285hp? A Stage 1 remap can take this 2007 - 2015 petrol engine from 285 BHP to 315 BHP and from 343 Nm to 365 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Edge can achieve.
The Ford Edge 3.5 V6 285hp is a 3.5L naturally aspirated petrol engine producing 285 BHP and 343 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 315 BHP and 365 Nm — a gain of around 30 BHP (11%) and 22 Nm (6%).
This engine has limited remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 Ecoboost 245hp | 245 → 270 | +25 | 365 → 415 | +50 | Good (6/10) |
| 3.5 V6 265hp | 265 → 285 | +20 | 339 → 360 | +21 | Moderate (4/10) |
Get a personalised remap quote for your Ford Edge. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
