Expected gains of +15 BHP and +60 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Ford Explorer 2.3 Ecoboost 280hp? A Stage 1 remap can take this 2011 - 2018 petrol engine from 280 BHP to 295 BHP and from 420 Nm to 480 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Explorer can achieve.
The Ford Explorer 2.3 Ecoboost 280hp is a 2.3L turbocharged petrol engine producing 280 BHP and 420 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 295 BHP and 480 Nm — a gain of around 15 BHP (5%) and 60 Nm (14%).
This engine has moderate remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0T Ecoboost 240hp | 240 → 270 | +30 | 366 → 420 | +54 | Good (6/10) |
| 3.5T V6 Ecoboost 370hp | 370 → 400 | +30 | 465 → 550 | +85 | Good (6/10) |
Get a personalised remap quote for your Ford Explorer. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.