Expected gains of +28 BHP and +50 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Ford Explorer 3.0 Ecoboost V6 457hp? A Stage 1 remap can take this 2019 -> petrol phev engine from 457 BHP to 485 BHP and from 825 Nm to 875 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Explorer can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Ford Explorer 3.0 Ecoboost V6 457hp is a 3.0L turbocharged petrol phev engine producing 457 BHP and 825 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 485 BHP and 875 Nm — a gain of around 28 BHP (6%) and 50 Nm (6%).
This engine has moderate remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain |
|---|
| Score |
|---|
| ST 3.0 V6 457hp | 457 → 485 | +28 | 825 → 875 | +50 | Limited (3.5/10) |
Get a personalised remap quote for your Ford Explorer. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.