Ford Ka 1.3 TDCi 75hp Remap

The Ford Ka 1.3 TDCi 75hp is a 1.3L turbocharged diesel engine producing 75 BHP and 145 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 100 BHP and 245 Nm — a gain of around 25 BHP (33%) and 100 Nm (69%).

This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.

From a technical perspective, the ECU is typically a Siemens/Continental SID (common) or Bosch (varies).

Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.. Older diesel: injector, turbo and intake condition can affect results; ensure maintenance is up to date.

Fuel economy note: economy gains unlikely at full power; depends on driving style.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.