Considering an ECU remap for your Ford Ranger 2.2 TDCi 160hp? A Stage 1 remap can take this 2015 - 2018 diesel engine from 160 BHP to 190 BHP and from 375 Nm to 460 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Ranger can achieve.
The Ford Ranger 2.2 TDCi 160hp is a 2.2L turbocharged diesel engine producing 160 BHP and 375 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 190 BHP and 460 Nm — a gain of around 30 BHP (19%) and 85 Nm (23%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.2 TDCi 130hp | 130 → 190 | +60 | 330 → 460 | +130 | Excellent (8/10) |
| 3.2 TDCi 200hp | 200 → 230 | +30 | 470 → 550 | +80 | Good (7/10) |
| 2.3 Ecoboost 270hp | 270 → 335 | +65 | 420 → 500 | +80 | Good (7.5/10) |
Get a personalised remap quote for your Ford Ranger. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
