Expected gains of +55 BHP and +70 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Ford Tourneo Custom 2.2 TDCI 125hp? A Stage 1 remap can take this 2013 - 2016 diesel engine from 125 BHP to 180 BHP and from 350 Nm to 420 Nm of torque (turbocharged). This engine scores 8.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Ford Tourneo Custom can achieve.
The Ford Tourneo Custom 2.2 TDCI 125hp is a 2.2L turbocharged diesel engine producing 125 BHP and 350 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 180 BHP and 420 Nm — a gain of around 55 BHP (44%) and 70 Nm (20%).
This engine scores highly for remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.2 TDCI 100hp | 100 → 180 | +80 | 310 → 420 | +110 | Excellent (8/10) |
| 2.2 TDCI 155hp | 155 → 180 | +25 | 385 → 420 | +35 | Good (6.5/10) |
Get a personalised remap quote for your Ford Tourneo Custom. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.