Considering an ECU remap for your GMC Canyon 3.6 V6 308hp? A Stage 1 remap can take this 2016 -> petrol engine from 308 BHP to 330 BHP and from 373 Nm to 395 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your GMC Canyon can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The GMC Canyon 3.6 V6 308hp is a 3.6L naturally aspirated petrol engine producing 308 BHP and 373 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 330 BHP and 395 Nm — a gain of around 22 BHP (7%) and 22 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain |
|---|
| Score |
|---|
| 2.8 Duramax 181hp | 181 → 210 | +29 | 500 → 540 | +40 | Good (6.5/10) |
Get a personalised remap quote for your GMC Canyon. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
