Considering an ECU remap for your Holden Captiva 3.2 V6 230hp? A Stage 1 remap can take this 2007 - 2009 petrol engine from 230 BHP to 250 BHP and from 297 Nm to 315 Nm of torque (naturally aspirated). This engine scores 4/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Holden Captiva can achieve.
The Holden Captiva 3.2 V6 230hp is a 3.2L naturally aspirated petrol engine producing 230 BHP and 297 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 250 BHP and 315 Nm — a gain of around 20 BHP (9%) and 18 Nm (6%).
This engine has limited remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 VCDI 127hp | 127 → 185 | +58 | 295 → 400 | +105 | Excellent (8/10) |
| 150 → 185 |
| +35 |
| 320 → 400 |
| +80 |
| Good (7.5/10) |
Get a personalised remap quote for your Holden Captiva. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
