Considering an ECU remap for your Holden Colorado 2.8 181hp? A Stage 1 remap can take this All diesel engine from 181 BHP to 200 BHP and from 500 Nm to 530 Nm of torque (turbocharged). This engine scores 5.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Holden Colorado can achieve.
Comparisons are calculated from our own recorded Stage 1 figures.
The Holden Colorado 2.8 181hp is a 2.8L turbocharged diesel engine producing 181 BHP and 500 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 200 BHP and 530 Nm — a gain of around 19 BHP (10%) and 30 Nm (6%).
This engine has moderate remap suitability, with gains weighted towards peak power — the improvement is most noticeable at higher RPM. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|
| 3.0D 163hp | 163 → 190 | +27 | 360 → 420 | +60 | Good (7/10) |
Get a personalised remap quote for your Holden Colorado. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
