Holden Commodore 6.0 V8 360hp Remap

Name: Holden Commodore 6.0 V8 360hp ECU Remap
Brand: Holden

Expected gains of +20 BHP and +20 Nm torque

Get Your Free Quote ↓

BHP+20 hp (6%)

Standard

360 hp

Tuned

380 hp

Torque+20 Nm (4%)

Standard

530 Nm

Tuned

550 Nm

Suitability

Limited (3/10)

Gains Profile

Limited headroom

Headroom

Low

Holden Commodore 6.0 V8 360hp ECU Remapping

Considering an ECU remap for your Holden Commodore 6.0 V8 360hp? A Stage 1 remap can take this 2013 -> petrol engine from 360 BHP to 380 BHP and from 530 Nm to 550 Nm of torque (naturally aspirated). This engine scores 3/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Holden Commodore can achieve.

How this engine compares

6thof 8 Holden Commodore engines by power gain
14%of the 9,842 engines we hold gain data for see a smaller power increase
8%of engines with torque data see a smaller torque increase

Comparisons are calculated from our own recorded Stage 1 figures.

Assessment

The Holden Commodore 6.0 V8 360hp is a 6.0L naturally aspirated petrol engine producing 360 BHP and 530 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 380 BHP and 550 Nm — a gain of around 20 BHP (6%) and 20 Nm (4%).

This engine has low remap suitability, though the available headroom is limited, so gains are modest compared to higher-output variants. The tuning headroom is classified as limited, based on the percentage gain available from the factory output.

Considerations: Naturally aspirated engine: gains are usually limited; results vary widely.. High tuned torque: check transmission torque capacity and service history.

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.

Considerations

!Naturally aspirated engine: gains are usually limited; results vary widely.

!High tuned torque: check transmission torque capacity and service history.

Other Commodore 2013 -> Engines

Engine

Technical Specifications

Fuel Type: Petrol
Aspiration: Naturally Aspirated
Displacement: 6L
Capacity: 5967 CC
Type: Car
Engine Family: Holden 6.0L V8 NA Petrol

ECU & Transmission

Likely ECU Low confidence: Petrol ECU (varies by market/year)
Gearbox Low confidence: Transmission varies by trim and market; check manual/automatic type and torque rating. At this torque level, transmission and driveline servicing history becomes especially important.

Get Your Free Quote

Get a personalised remap quote for your Holden Commodore. We'll connect you with a trusted professional in your area.

Confirm Your Vehicle

MakeHolden

ModelCommodore

Generation2013 ->

Engine6.0 V8 360hp

All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.

We recommend discussing your specific vehicle with a qualified remap professional before proceeding.

3.6 V6 280hp	280 → 301	+21	350 → 376	+26	Moderate (4/10)
6.0 V8 350hp	350 → 370	+20	517 → 535	+18	Limited (3/10)
6.2 V8 408hp	408 → 430	+22	570 → 590	+20	Limited (3/10)