Expected gains of +35 BHP and +71 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Hyundai Creta / ix25 1.4 CRDi 90hp? A Stage 1 remap can take this 2015 - 2019 diesel engine from 90 BHP to 125 BHP and from 219 Nm to 290 Nm of torque (turbocharged). This engine scores 8.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Hyundai Creta / ix25 can achieve.
The Hyundai Creta / ix25 1.4 CRDi 90hp is a 1.4L turbocharged diesel engine producing 90 BHP and 219 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 125 BHP and 290 Nm — a gain of around 35 BHP (39%) and 71 Nm (32%).
This engine scores highly for remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
Fuel economy note: economy gains unlikely at full power; depends on driving style.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.6 CRDi 128hp | 128 → 155 | +27 | 260 → 325 | +65 | Excellent (8/10) |
Get a personalised remap quote for your Hyundai Creta / ix25. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.