Expected gains of +20 BHP and +58 Nm torque
Get Your Free Quote ↓Considering an ECU remap for your Hyundai Creta / ix25 1.0 T-GDI 120hp? A Stage 1 remap can take this 2020 -> ... petrol engine from 120 BHP to 140 BHP and from 172 Nm to 230 Nm of torque (turbocharged). This engine scores 7.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Hyundai Creta / ix25 can achieve.
The Hyundai Creta / ix25 1.0 T-GDI 120hp is a 1.0L turbocharged petrol engine producing 120 BHP and 172 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 140 BHP and 230 Nm — a gain of around 20 BHP (17%) and 58 Nm (34%).
This engine scores highly for remap suitability, with gains weighted towards torque — you will notice the difference most strongly in mid-range pulling power and in-gear acceleration. The tuning headroom is classified as high, based on the percentage gain available from the factory output.
Considerations: Turbo petrol: fuel quality and cooling can influence repeatable performance.. Large torque increase: drivetrain condition (clutch/gearbox) becomes more important at this level.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 1.4 T-GDi 140hp | 140 → 175 | +35 |
| 242 → 310 |
| +68 |
| Good (7.5/10) |
Get a personalised remap quote for your Hyundai Creta / ix25. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.