Considering an ECU remap for your Hyundai ix45 2.2 CRDi 200hp? A Stage 1 remap can take this 2013 -> diesel engine from 200 BHP to 230 BHP and from 430 Nm to 480 Nm of torque (turbocharged). This engine scores 6.5/10 for remap suitability. Get a free personalised quote from a trusted remap professional and find out exactly what your Hyundai ix45 can achieve.
The Hyundai ix45 2.2 CRDi 200hp is a 2.2L turbocharged diesel engine producing 200 BHP and 430 Nm from the factory. With a typical Stage 1 remap, output increases to approximately 230 BHP and 480 Nm — a gain of around 30 BHP (15%) and 50 Nm (12%).
This engine has moderate remap suitability, with a balanced spread of gains across both power and torque — providing a noticeable improvement across the rev range. The tuning headroom is classified as moderate, based on the percentage gain available from the factory output.
Considerations: High tuned torque: check transmission torque capacity and service history.
Fuel economy note: possible improvement with conservative driving.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method. We recommend discussing your specific vehicle with a qualified remap professional.
| Engine | BHP | Gain | Torque | Gain | Score |
|---|---|---|---|---|---|
| 2.0 CRDi 150hp | 150 → 180 | +30 | 380 → 435 | +55 | Good (7/10) |
Get a personalised remap quote for your Hyundai ix45. We'll connect you with a trusted professional in your area.
All figures shown are typical estimates based on aggregated Stage 1 data for this engine variant. Actual results depend on vehicle condition, mileage, and the chosen tuning method.
We recommend discussing your specific vehicle with a qualified remap professional before proceeding.
